2017 Kia Forte EXFACTORY OEM SERVICE PROCEDURE

Tire Pressure Monitoring System DTCS

TIRE PRESSURE MONITORING SYSTEM DIAGNOSTIC TROUBLE CODE (DTC) IDENTIFICATION

DTC Description
<DTC C1121 Sensor 1 Battery Voltage Low
<DTC C1122 Sensor 2 Battery Voltage Low
<DTC C1123 Sensor 3 Battery Voltage Low
<DTC C1124 Sensor 4 Battery Voltage Low
<DTC C1126 TPMS ECU Battery Voltage Low
<DTC C1127 TPMS ECU Battery Voltage High
<DTC C1212 Vehicle Speed Sensor
<DTC C1306 Internal vehicle RF source e.g. scanner
<DTC C1312 Sensor 1 Radio Frequency Channel Failure
<DTC C1313 Sensor 2 Radio Frequency Channel Failure
<DTC C1314 Sensor 3 Radio Frequency Channel Failure
<DTC C1315 Sensor 4 Radio Frequency Channel Failure
<DTC C1322 Sensor 1 Over Temperature
<DTC C1323 Sensor 2 Over Temperature
<DTC C1324 Sensor 3 Over Temperature
<DTC C1325 Sensor 4 Over Temperature
<DTC C1332 Sensor 1 Fault
<DTC C1333 Sensor 2 Fault
<DTC C1334 Sensor 3 Fault
<DTC C1335 Sensor 4 Fault
<DTC C1611 Vehicle signal (VSS) time out
<DTC C1616 CAN Bus OFF
<DTC C1660 Receiver RF Circuit Fail
<DTC C1661 Receiver EEPROM Failure
<DTC C1662 Auto Learning failure
<DTC C1668 Internal Failure Detection
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.