2016 Kia Soul Base, Automatic TransFACTORY OEM SERVICE PROCEDURE

Repair Procedures: Installation

  1. Check that the shift lever is placed in the "N" position
  2. Install the inhibitor switch (A).
    NOTE: Lightly tighten the inhibitor switch mounting bolts so that necessary adjustments can be made.
    G11952594Courtesy of
  3. Install the manual control lever (A).
    NOTE: Lightly tighten the manual control lever nut (B) so that necessary adjustments can be made.
    G11952595Courtesy of
  4. Align the hole (A) in the manual control lever with the "N" position hole (B) of the inhibitor switch and then insert the SST inhibitor switch guide pin (09480-A3800).
    G11952596Courtesy of
  5. Tighten the nut (A) and bolts (B) with the specified torque.

    Tightening torque: 

    A: 7.8 ~ 9.8 N.m (0.8 ~ 1.0 kgf.m, 5.8 ~ 7.2 lb-ft)

    B: 9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

    G11952597Courtesy of
  6. Remove the SST (09480-A3800) from the hole.
  7. Connect the inhibitor switch connector (A).
  8. Install the shift cable by tightening nut (B).
    NOTE: Lightly tighten the shift cable mounting nut (B) so that necessary adjustments can be made.
    G11952598Courtesy of
  9. Push the shift cable to the arrow "F" to eliminate free play and then tighten the nut (A) with the specified torque.

    Tightening torque: 

    9.8 ~ 14.7 N.m (1.0 ~ 1.4 kgf.m, 7.2 ~ 10.8 lb-ft)

    G11952599Courtesy of
  10. Install the air cleaner assembly.

    (Refer to "AIR CLEANER .")

  11. Connect the battery negative (-) cable.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.