Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

2016 Kia Sorento LFACTORY OEM SERVICE PROCEDURE

Key Interlock Switch

Remove the key interlock switch (B) after removing the switch cover (A).

Fig 1: Locate Key Interlock Switch And Switch Cover
Courtesy of KIA MOTORS AMERICA, INC.
Remove the shift lock solenoid (A).

Fig 2: Locate Shift Lock Solenoid
Courtesy of KIA MOTORS AMERICA, INC.
Remove the manual mode switch housing (A).

Fig 3: Locate Manual Mode Switch Housing
Courtesy of KIA MOTORS AMERICA, INC.
Remove the main connector (A).

Fig 4: Locate Main Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the pin fixing bracket (A) from the main connector.

Fig 5: Locate Main Connector Pin Fixing Bracket
Courtesy of KIA MOTORS AMERICA, INC.
Remove the pin of key interlock switch from the main connector.

Fig 6: Remove Pin From Main Connector

Courtesy of KIA MOTORS AMERICA, INC.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready Tools Compare Repair Quote Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.