Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2016 Kia Sorento LFACTORY OEM SERVICE PROCEDURE
Anti-Lock Brake System/Electronic Stability Control System DTCS
ANTI-LOCK BRAKE SYSTEM/ELECTRONIC STABILITY CONTROL SYSTEM DIAGNOSTIC TROUBLE CODE (DTC) IDENTIFICATION
| DTC | Description |
|---|---|
| DTC C1101 | 01: Battery Voltage High |
| DTC C1102 | 01: Battery Voltage Low |
| DTC C1200 | 01: Wheel Speed Sensor Front-LH Open/Short |
| DTC C1201 | 02: Wheel Speed Sensor Front-LH Range/Performance/Intermittent |
| DTC C1202 | 02: Wheel Speed Sensor Front-LH Invalid/no Signal |
| DTC C1203 | 01: Wheel Speed Sensor Front-RH Open/Short |
| DTC C1204 | 02: Wheel Speed Sensor Front-RH Range/Performance/Intermittent |
| DTC C1205 | 02: Wheel Speed Sensor Front-RH Invalid/no Signal |
| DTC C1206 | 01: Wheel Speed Sensor Rear-LH Open/Short |
| DTC C1207 | 02: Wheel Speed Sensor Rear-LH Range/Performance/Intermittent |
| DTC C1208 | 02: Wheel Speed Sensor Rear-LH Invalid/no Signal |
| DTC C1209 | 01: Wheel Speed Sensor Rear-RH Open/Short |
| DTC C1210 | 02: Wheel Speed Sensor Rear-RH Range/Performance/Intermittent |
| DTC C1211 | 02: Wheel Speed Sensor Rear-RH Invalid/no Signal |
| DTC C1213 | 02: Wheel Speed Frequency Error (Generic Wheel Speed Error) |
| DTC C1235 | 01: Pressure Sensor (Primary) - Electrical |
| DTC C1237 | 02: Pressure Sensor - Other |
| DTC C1260 | 02: Steering Angle Sensor Circuit-Signal |
| DTC C1261 | 04: Steering Angle Sensor is not Calibrated |
| DTC C1283 | 02: Lateral G Sensor/Longitudinal G Sensor/Yaw Rate Sensor - Signal Error |
| DTC C1285 | 04: Uncalibrated Ax Signal |
| DTC C1286 | 02: Yaw Rate & G Sensor Fail-Check SRSCM |
| DTC C1358 | 01: AVH not Available due to EPB in Emergency Release |
| DTC C1503 | 01: TCS Switch Error |
| DTC C1542 | 01: Brake Circuit Error |
| DTC C1604 | 04: ECU Hardware Error |
| DTC C160E | 08: P-CAN Bus Off |
| DTC C1611 | 08: CAN Time-out EMS |
| DTC C1612 | 08: CAN Time-out TCU |
| DTC C1613 | 08: CAN signal error EMS |
| DTC C1616 | 08: C-CAN Bus Off |
| DTC C1623 | 08: CAN Time-out Steering Angle Sensor |
| DTC C1627 | 08: CAN Time-out 4WD |
| DTC C1628 | 08: CAN Time-out Cluster |
| DTC C1638 | 08: ACC communication error |
| DTC C1643 | 08: CAN Time-out Yaw Rate & G Sensor |
| DTC C1649 | 08: CAN time-out ECM for SCC (Check ECM) |
| DTC C1650 | 08: CAN signal error SCC |
| DTC C1651 | 08: CAN time-out EPB |
| DTC C1652 | 08: CAN signal error EPB |
| DTC C1687 | 08: CAN Time-out VSM2 (MDPS) |
| DTC C1688 | 08: VSM2 (MDPS) Signal Error |
| DTC C1702 | 04: Variant Coding Error |
| DTC C2112 | 01: Valve Relay Error |
| DTC C2228 | 08: CAN signal error TCM for SCC (Check TCM) |
| DTC C2380 | 01: ABS/TCS/ESP valve error |
| DTC C2402 | 01: Motor Electrical |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.