2016 Kia Sorento LFACTORY OEM SERVICE PROCEDURE

Repair Procedure: Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery terminal.
  2. Remove the second row seat.

    (Refer to Body - "REAR SEAT ")

  3. Remove the rear seat LH air duct (A) after loosening the mounting nuts.
    Fig 1: Locate Rear Seat LH Air Duct
    G11865605Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the seat cable bracket (A) after loosening the mounting nuts.
    Fig 2: Loosen Seat Cable Bracket Mounting Nuts
    G11865606Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the fuel pump service cover (A) after loosening the mounting screws.
    Fig 3: Loosen Fuel Pump Service Cover Mounting Screws
    G11865607Courtesy of KIA MOTORS AMERICA, INC.
  6. Remove the fuel tank pressure sensor (A) after disconnect the connector (B).
Fig 4: Remove Fuel Tank Pressure Sensor Connector
G11865608Courtesy of KIA MOTORS AMERICA, INC.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.