2016 Kia Sedona EXFACTORY OEM SERVICE PROCEDURE

Inspection Using GDS

WARNING: This page is about a different car, the 2016 Kia K900. However, it is still accessible from the selected car via links, so may be relevant.
  1. The SWRCe can diagnose by using the GDS more quickly.

    The BCM communicates with the GDS and then reads the input/output value and drives the actuator.

  2. To diagnose the SWRC function, select the menu of model and body control module.
  3. Select "Input/output monitoring", if you will check current data of body network system. It provides input/output status of each module.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.