2016 Kia Sedona EXFACTORY OEM SERVICE PROCEDURE

Front Keyboard Unit

WARNING: This page is about a different car, the 2016 Kia K900. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the floor console upper cover.

    (Proceed to Body - "FLOOR CONSOLE ASSEMBLY ")

  3. Disconnect the connector from the console upper cover.
    Fig 1: Disconnecting Connector From Console Upper Cover
    G11803891Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the front keyboard unit (A) after loosening the mounting screws.
Fig 2: Removing Front Keyboard Unit Mounting Screws
G11803892Courtesy of KIA MOTORS AMERICA, INC.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.