2016 Kia Forte LX, Standard TransFACTORY OEM SERVICE PROCEDURE

Repair Procedures: Adjustment

Select cable adjustment 

  1. Remove the select cable snap pin (A) and then remove the select cable (B) from the shift lever pin.
    Fig 1: Remove Select Cable From Shift Lever Pin
    G11795119Courtesy of KIA MOTORS AMERICA, INC.
  2. Shift the shift lever to 3rd gear.
  3. Move the slide clip (B) of guide member (A) in the direction as shown in the illustration.
    Fig 2: Move Slide Clip Of Guide Member
    G11795120Courtesy of KIA MOTORS AMERICA, INC.
  4. Install the select cable (A).
    Fig 3: Select Cable Installation Position
    G11795121Courtesy of KIA MOTORS AMERICA, INC.
  5. Insert the slide clip in the direction as shown in the illustration and then install the snap pin (A).
Fig 4: Insert Select Cable Slide Clip
G11795122Courtesy of KIA MOTORS AMERICA, INC.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.