Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSKIA2015SOUL EV BASEREPAIR AND DIAGNOSISSTEERINGSTEERING CONTROL SYSTEMSSTEERING WHEELCOMPONENTS AND COMPONENTS LOCATIONREPAIR PROCEDURESREPLACEMENT
2015 Kia Soul EV Base
Repair Procedures: Replacement
2015 Kia Soul EV BaseSECTION Replacement
- Disconnect the battery negative cable from the battery and then wait for at least 30 seconds.
- Turn the steering wheel so that the front wheels are facing straight ahead.
- Remove the airbag module.
(Refer to Restraint - "DRIVER AIRBAG (DAB) MODULE AND CLOCK SPRING ")
- Disconnect the connector & lock nut (A) and then remove the steering wheel using the special service tool (09561-11001).
Tightening torque:
39.2 ~ 49.0N-m (4.0 ~ 5.0kgf-m, 28.9 ~ 36.2lb-ft)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.