SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSKIA2015SOUL EV BASEREPAIR AND DIAGNOSISELECTRICALCHARGING SYSTEMSELECTRIC POWER CONTROL UNIT (EPCU)VEHICLE CONTROL UNIT (VCU)DESCRIPTION AND OPERATIONMAIN FEATURES
2015 Kia Soul EV Base

Main Features

2015 Kia Soul EV BaseSECTION Main Features
Main Features Details
Drive Motor Control Calculates motor torque command with consideration to usable battery power, usable motor torque, and driver demand (APS, Brake SW, Shift Lever)
Regenerative Brake Control
  • Calculates motor charge torque command for regenerative braking.
  • Calculates regenerative brake force.
A/C Load Control Sends final FATC allowed power by using the battery information and FATC requested power data.
Electric Load Power Supply Determines LDC ON/OFF and operation mode based on the battery information and vehicle status.
Cluster Display Drive Power, Energy Flow, ECO Level, Power Down, Shift Lever Position, Service Lamp & Ready Lamp ON Request
DTE (Distance to Empty)
  • Indicates usable battery energy, and distance to empty based on prior drive pattern.
  • If drive path is set by using AVN, DTE accuracy is improved by estimating the energy consumption to destination.
Reserve/Remote Charge/A/C
  • Remote control via Center/Smartphone through synchronization with TMU.
  • Reservation function through operation time setting by driver.
Analog/digital signal processing and diagnosis APS, Brake Switch, Shift Lever, Airbag Deployment Signal processing and diagnosis
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.