SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSKIA2015SOUL EV BASEREPAIR AND DIAGNOSISBODY & FRAMEWINDOWSPOWER WINDOWSPOWER WINDOW MOTORREPAIR PROCEDURESINSPECTIONFRONT POWER WINDOW MOTOR
2015 Kia Soul EV Base

Front Power Window Motor

2015 Kia Soul EV BaseSECTION Front Power Window Motor
  1. Disconnect the negative (-) battery terminal.
  2. Remove the front door trim.

    (Refer to Body - "FRONT DOOR TRIM ")

  3. Disconnect the connector (A) from the motor.

    (A: Safety, B: Standard)

    Fig 1: Connector From Motor
    G10744705Courtesy of KIA MOTORS AMERICA, INC.
  4. Connect the motor terminals directly to battery voltage (12V) and check that the motor operates smoothly. Next, reverse the polarity and check that the motor operates smoothly in the reverse direction. If the operation is abnormal, replace the motor.

    [General Window Motor] 

    Fig 2: General Window Motor Terminal Continuity Chart
    G10744706Courtesy of KIA MOTORS AMERICA, INC.
  5. Connect the terminals No. 2 and No. 3 to battery voltage (12V) and check that the motor operates smoothly when connected to the following terminals.

    [Safety Window Motor] 

    Fig 3: Safety Window Motor Terminal Continuity Chart
    G10744707Courtesy of KIA MOTORS AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.