SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSKIA2015SOUL EV BASEREPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMEDOOR LOCKSSMART KEY SYSTEMSMART KEYREPAIR PROCEDURESINSPECTIONSMART KEY CODE REGISTRATION (USING GDS)
2015 Kia Soul EV Base

Smart Key Code Registration (Using GDS)

2015 Kia Soul EV BaseSECTION Smart Key Code Registration (Using GDS)
  1. Connect the DLC cable of GDS to the data link connector (16 pins) in driver side crash pad lower panel, turn the power on GDS.
    Fig 1: Crash Pad Lower Panel Of Driver Side
    G10744798Courtesy of KIA MOTORS AMERICA, INC.
  2. Select the vehicle model and then perform Smart Key Code Saving  "CODE SAVING".
    Fig 2: Screen Display - Transmitter Code Saving
    G10744799Courtesy of KIA MOTORS AMERICA, INC.
  3. After selecting "CODE SAVING" menu, press the "ENTER" button to display the following screen.
    Fig 3: Screen Display - Code Saving (1 Of 10)
    G10744800Courtesy of KIA MOTORS AMERICA, INC.
  4. After pushing the SSB to "OFF", push "ENTER" key to proceed to the next mode for code saving. Follow steps 1 to 4 and then code saving is completed.
Fig 4: Screen Display - Code Saving (2 Of 10)
G10744801Courtesy of KIA MOTORS AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.