Repair Procedures: Replacement: Disassembly

2015 Kia Soul Base, Automatic TransSECTION Disassembly
  1. Loosen the screw (A-6ea) and then remove the lower cover (B) from the steering wheel body.
    Fig 1: Lower Cover Screws
    G09777922Courtesy of KIA MOTORS AMERICA, INC.
  2. Remove the wiring (A) & Heated unit (B).
    Fig 2: Heated Unit & Wiring
    G09777923Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the remote control upper switch assembly (A) and wiring.
    Fig 3: Remote Control Upper Switch Assembly & Wiring
    G09777924Courtesy of KIA MOTORS AMERICA, INC.
  4. Loosen the screw and then remote control switch assembly (A).
    Fig 4: Remote Control Switch Assembly Screws
    G09777925Courtesy of KIA MOTORS AMERICA, INC.
  5. Installation is the reverse of the removal.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.