SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSKIA2015SOUL BASE, AUTOMATIC TRANSREPAIR AND DIAGNOSISBRAKESTRACTION CONTROLELECTRONIC STABILITY CONTROL (ESC) SYSTEMFRONT WHEEL SPEED SENSORREPAIR PROCEDURESREMOVAL
2015 Kia Soul Base, Automatic Trans

Repair Procedures: Removal

2015 Kia Soul Base, Automatic TransSECTION Removal
  1. Remove the front wheel & tire.

    Tightening torque: 

    88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)

  2. Remove the front wheel speed sensor mounting bolt (A).

    Tightening torque: 

    6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)

    Fig 1: Identifying Front Wheel Speed Sensor Mounting Bolt
    G09773605Courtesy of KIA MOTORS AMERICA, INC.
  3. Disconnect the front wheel speed sensor connector (A).
    Fig 2: Identifying Front Wheel Speed Sensor Connector
    G09773606Courtesy of KIA MOTORS AMERICA, INC.
  4. Loosen the mounting bolt (A) and then remove the front wheel speed sensor.

    Tightening torque: 

    8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)

    Fig 3: Identifying Front Wheel Speed Sensor Mounting Bolt
    G09773607Courtesy of KIA MOTORS AMERICA, INC.
  5. Install in the reverse order of removal.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.