Repair Procedures: Removal

2015 Kia Soul +SECTION Removal
  1. Disconnect the negative (-) battery terminal.
  2. Detach the gear boots (A).
    Fig 1: Gear Boots
    G09782409Courtesy of KIA MOTORS AMERICA, INC.
  3. Using a screwdriver or remover, remove the console upper cover (A).
    Fig 2: Console Upper Cover & Clip Locations
    G09782410Courtesy of KIA MOTORS AMERICA, INC.
  4. Disconnect the connectors (A) from the console upper cover.
    Fig 3: Console Upper Cover Connectors
    G09782411Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the start/stop button (A) after loosening the mounting screws.
    Fig 4: Start/Stop Button
    G09782412Courtesy of KIA MOTORS AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.