Quick Lookups: Fluids

2015 Kia Sorento EX, FWDSECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil w/Front A/C 4.40 OZS. 0.13 L PAG 46 S
Air Cond Compressor Oil w/Front and Rear A/C 6.40 OZS. 0.18 L PAG 46 S
Air Cond Refrigerant Front & Rear 1.65 LBS. 0.74 KG R-134a S
Air Cond Refrigerant Front 1.32 LBS. 0.59 KG R-134a S
Automatic Transmission Fluid 3.3L Eng 8.24 QTS. 7.79 L MICHANG ATF SP-IV, SK ATF SP-IV, NOCA ATF SP-IV, Kia genuine ATF SP-IV or other brands meeting the SP-IV specification approved by KIA Motors Corp. S
Brake Fluid 0.70 QTS. 0.66 L FMVSS116 DOT 3 or DOT 4 Brake Fluid S
Engine Coolant 3.3L Eng,Automatic Trans w/o Trailer Package 9.20 QTS. 8.7 L 50/50 mixture of Ethylene Glycol Antifreeze and distilled water The engine coolant should be compatible with aluminum engine parts. S
Engine Coolant 3.3L Eng,Automatic Trans w/Trailer Package 9.60 QTS. 9.08 L 50/50 mixture of Ethylene Glycol Antifreeze and distilled water The engine coolant should be compatible with aluminum engine parts. S
Engine Oil 3.3L Eng Drain and Refill,w/Filter 6.02 QTS. 5.69 L API SM, ILSAC GF-4 or above, SAE 5W-20 or SAE 5W-30 If the API service SM engine oil is not available, you may use API service SL. For better fuel economy, it is recommended to use the engine oil viscosity grade SAE 5W-30 (API SM/ILSAC GF-4). S
Fuel Tank 17.40 GALS. 65.86 L S
Manual Transmission Fluid 1.90 QTS. 1.79 L API - GL-4, SAE 75W-85 S
Transfer Case Fluid 3.3L Eng 0.74 QTS. 0.7 L Hypoid Gear Oil API - GL-5, SAE 75W-90 SHELL SPIRAX X or equivalent. S
Windshield Washer Fluid N/A N/A S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.