Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

2015 Kia Sorento EX, FWDFACTORY OEM SERVICE PROCEDURE

Repair Procedures: Removal

Disconnect the negative(-) battery terminal.
Remove the crash pad lower panel (A).
(Refer to "CRASH PAD LOWER PANEL REPLACEMENT ")

Fig 1: Crash Pad Lower Panel
Courtesy of KIA MOTORS AMERICA, INC.
Remove the start/stop button cover (A) after loosening the mounting screw.

Fig 2: Start/Stop Button Cover
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the connector (A).

Fig 3: Start/Stop Button Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the start/stop button (A) after loosening the mounting screws.

Fig 4: Start/Stop Button
Courtesy of KIA MOTORS AMERICA, INC.

Chapter Navigation

Return to Chapter: Repair Procedures

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready Tools Compare Repair Quote Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.