Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSKIA2015SEDONA SXLREPAIR AND DIAGNOSISTRANSMISSIONAUTOMATIC TRANSAUTOMATIC TRANSAXLE CONTROL SYSTEMTRANSAXLE OIL TEMPERATURE SENSORREPAIR PROCEDURESINSPECTION

2015 Kia Sedona SXL

Repair Procedures: Inspection

2015 Kia Sedona SXLSECTION Inspection

Turn ignition switch OFF.
Remove the battery and battery tray.
(Refer to Engine Electrical System - "BATTERY ")
Disconnect the solenoid valve connector (A).

Fig 1: Disconnecting Solenoid Valve Connector
Courtesy of KIA MOTORS AMERICA, INC.
Measure the resistance between + terminal (9) and - terminal (13).

Fig 2: Solenoid Valve Connector Terminals
Courtesy of KIA MOTORS AMERICA, INC.

Check that the resistance is within the specification.

Item	Specification
Temp.[(°C)°F]/Resistance (kΩ)	(-40)-40/48.1
	(-20)-4.0/15.6
	(0)32.0/5.88
	(20)68.0/2.51
	(40)104.0/1.19
	(60)140.0/0.61
	(80)176.0/0.32
	(100)212.0/0.18
	(120)248.0/0.10
	(140)284.0/0.06
	(150)302.0/0.05

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.