SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSKIA2015SEDONA SXLREPAIR AND DIAGNOSISENGINE PERFORMANCEENGINE CONTROL SYSTEMSENGINE CONTROL SYSTEMMANIFOLD ABSOLUTE PRESSURE SENSOR (MAPS)REPAIR PROCEDURESINSPECTION
2015 Kia Sedona SXL

Repair Procedures: Inspection

2015 Kia Sedona SXLSECTION Inspection
  1. Connect the GDS to the Data Link Connector (DLC).
  2. Measure the output voltage of the MAPS at idle and IG ON.
    Pressure [kPa (kgf/cm2 , psi)] Output Voltage (V) [Ref=5V]
    20.0 (0.20, 2.90) 0.79
    46.66 (0.47, 6.77) 1.84
    101.32 (1.03, 14.7) 4.0
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.