Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSKIA2015SEDONA EXREPAIR AND DIAGNOSISGENERAL INFORMATIONDTC INDEXCLUSTER MODULE DTCS
2015 Kia Sedona EX
Cluster Module DTCS
2015 Kia Sedona EXSECTION Cluster Module DTCS
CLUSTER MODULE DIAGNOSTIC TROUBLE CODE (DTC) IDENTIFICATION
| DTC | Description |
|---|---|
| B100051 | Cluster Coding Not Programmed |
| B100152 | SCC Missing Error - without SCC unit or connector fault |
| B100155 | SCC Present Error - Coding code error |
| B100352 | ABS Missing Error - without ABS unit or connector fault |
| B100355 | ABS Present Error - Coding code error |
| B100552 | Airbag Missing Error - without Airbag unit or connector fault |
| B100555 | Airbag Present Error - Coding code error |
| B100852 | MDPS Missing Error - without MDPS unit or connector fault |
| B100855 | MDPS Present Error - Coding code error |
| B101052 | ESC Missing Error - without ESC unit or connector fault |
| B101055 | ESC Present Error - Coding code error |
| B102052 | TPMS Missing Error - without TPMS unit or connector fault |
| B102055 | TPMS Present Error - Coding code error |
| B104052 | LKAS/LDWS Missing Error - without LKAS/LDWS unit or connector fault |
| B104055 | LKAS/LDWS Present Error - Coding code error |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.