Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSKIA2015SEDONA EXREPAIR AND DIAGNOSISBODY & FRAMEDOOR LOCKSSMART KEY SYSTEMSMART KEY UNITREPAIR PROCEDURESBUZZERTAILGATE OPEN SWITCH
2015 Kia Sedona EX
Tailgate Open Switch
2015 Kia Sedona EXSECTION Tailgate Open Switch
- Disconnect the negative (-) battery terminal.
- Remove the tail gate trim.
(Refer to Body - "TAIL GATE TRIM ")
- Remove the tail gate back panel.
(Refer to Body - "TAIL GATE BACK PANEL ")
- Disconnect the tail gate open switch and license lamp connectors (A).
- Remove the tail gate open switch and license plate lamp (A) by loosening the bolts inside the tail gate.
- Remove the tail gate open switch assembly (A) after loosening the screws.
- Remove the license lamp bulb (B) and then disconnect the wiring (C).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.