Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
System Initialization: Notes
System initialization is needed to recognize the closing position of the tailgate.
The initialization process after battery power is reset, is to find the maximum opening and closing position of the tailgate.
After the successful initialization, the tailgate's opening and closing position have to be recognized to guarantee the general tailgate's opening and closing.
Procedure:
- Calibration Mode
(Refer to Smart Tailgate Module - "Description and Operation")
- Manual De-Calibration Mode
(Refer to Smart Tailgate Module - "Description and Operation")
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.