SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSKIA2015RIO EX, 4D SEDANREPAIR AND DIAGNOSISTRANSMISSIONTRANSMISSION CONTROL SYSTEMSAUTOMATIC TRANSAXLE CONTROL SYSTEMSHIFT LEVERREPAIR PROCEDURESREMOVALSHIFT LEVER ASSEMBLY REPLACEMENT
2015 Kia Rio EX, 4D Sedan

Shift Lever Assembly Replacement

2015 Kia Rio EX, 4D SedanSECTION Shift Lever Assembly Replacement
  1. Remove the center console.

    (Refer to "INTERIOR (CONSOLE) " in BD group)

  2. Disconnect the connector (A)
  3. Remove the control cable (B).
    Fig 1: Identifying Connector And Control Cable
    G08321798Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the shift lock cable (A).

    Tightening torque: 

    9.8 ~ 14.7 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft)

    Fig 2: Identifying Shift Lock Cable
    G08321799Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the wiring clip (A).
  6. Remove the AT lever(shift lever) assembly (B) by removing the bolts (4ea).

    Tightening torque: 

    8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)

    Fig 3: Identifying Wiring Clip And AT Lever(Shift Lever) Assembly
    G08321800Courtesy of KIA MOTORS AMERICA, INC.
  7. Installation is the reverse of removal.
    NOTE: Adjust the shift lock cable.
    (Refer to Adjustment  .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.