Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSKIA2015RIO EX, 4D SEDANREPAIR AND DIAGNOSISTRANSMISSIONTRANSMISSION CONTROL SYSTEMSAUTOMATIC TRANSAXLE CONTROL SYSTEMOUTPUT SPEED SENSORREPAIR PROCEDURESREMOVAL
2015 Kia Rio EX, 4D Sedan
Repair Procedures: Removal
2015 Kia Rio EX, 4D SedanSECTION Removal
- Remove the battery and the battery tray.
(Refer to "CHARGING SYSTEM " in EE group.)
- Remove the under cover (A).
Tightening torque:
6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)
- Replace new gasket and the plug after draining the automatic transaxle fluid by removing the drain plug. (Refer to FLUID .
- Remove the air breather hose (A).
- Remove the valve body cover (B).
Tightening torque:
13.7 ~ 15.7 N.m (1.4 ~ 1.6 kgf.m, 10.8 ~ 11.6 lb-ft)
CAUTION: Always replace the gasket of the eyebolt use new one whenever loosening eyebolt.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.