Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSKIA2015K900 V8REPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSDTC INDEXFRONT SMART JUNCTION BLOCK DTCS
2015 Kia K900 V8
Front Smart Junction Block DTCS
2015 Kia K900 V8SECTION Front Smart Junction Block DTCS
FRONT SMART JUNCTION BLOCK DIAGNOSTIC TROUBLE CODE (DTC) IDENTIFICATION
| DTC | Description |
|---|---|
| B160200 | CAN Line Error (B-CAN) |
| B160300 | CAN Bus OFF (B-CAN) |
| B236100 | Turn Signal LH Front Open Circuit |
| B236200 | Turn Signal LH Rear Open Circuit |
| B236300 | Turn Signal RH Front Open Circuit |
| B236400 | Turn Signal RH Rear Open Circuit |
| B236500 | Turn Signal LH Front SCG |
| B236600 | Turn Signal LH Rear SCG |
| B236700 | Turn Signal RH Front SCG |
| B236800 | Turn Signal RH Rear SCG |
| B237400 | Body Load |
| B251000 | Head Lamp High RH SCG |
| B251100 | Head Lamp High LH SCG |
| B251400 | External Tail Lamp RH Circuit Short to Ground |
| B251500 | External Tail Lamp LH Circuit Short to Ground |
| B251600 | Front Fog Lamp Circuit Short to Ground |
| B251700 | Internal Tail Lamp Circuit Short to Ground |
| B255100 | Head Lamp Low-Right Short to Ground |
| B255500 | Head Lamp Low-Left Short to Ground |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.