Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSKIA2015FORTE5 EXREPAIR AND DIAGNOSISBODY & FRAMEDOOR LOCKSSMART KEY SYSTEMSPECIFICATION
2015 Kia Forte5 EX
Smart Key System: Specification
2015 Kia Forte5 EXSECTION Specification
SMART KEY UNIT SPECIFICATION
| Items | Specification |
|---|---|
| Rated voltage | DC 12V |
| Operating voltage | DC 9 ~ 16V |
| Operating temperature | -30°C~75°C (-22°F~167°F) |
| Dark current | Max. 4mA (When welcome light function off) |
| Frequency | 315 Mhz |
SMART KEY FOB SPECIFICATION
| Items | Specification |
|---|---|
| Battery | Lithium battery 3V 1EA |
| Distance | 30m |
| Battery life | More than 2 years
WARNING:
An inappropriately disposed battery can be harmful to the environment and human health. Dispose the battery according to your local law(s) or regulation.
|
| Push buttons | 3 (Door lock/unlock, Trunk lid) |
| Frequency (Rx) | 134.2 kHz |
| Frequency (Tx) | 314.92 MHz |
| Numbers | 2EA |
ANTENNA SPECIFICATION
| Items | Specification |
|---|---|
| Rated voltage | DC 12V |
| Operating voltage | DC9 ~ 16V |
| Operating temperature | -30°C ~ 80°C (-22°F ~ 176°F) (without battery) |
| Frequency | 134.2 kHz |
| Numbers | Interior (1EA), Door (2EA), Trunk (1EA), Bumper (1EA) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.