AVN System: Specifications

2015 Kia Forte5 EXSECTION Specifications
AVN HEAD UNIT SPECIFICATIONS

Item Specification
Power supply DC 14.4V negative ground
Load Impedance 4 ohm x 4
Tuning type PLL SYNTHESIZED TUNING
Antenna 80PF 75ohm
Dark current Max. 2.0mA (Head unit only)
Frequency range/Channel space FM 87.5~107.9 MHz/200 kHz
AM 530~1, 710 kHz/10 kHz
S/N FM Min. 50 dB
AM Min. 40 dB
SPEAKER SPECIFICATIONS

Item Specification
Input Power Front 20W (Max 40W)
Rear 20W (Max 40W)
Front Tweeter 20W (Max 40W)
Speaker Impedance Front 4 ± 0.6 Ω
Rear 4 ± 0.6 Ω
Front Tweeter 3.4 ± 0.5 Ω
Speaker Number 6
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.