2015 Kia Forte LX, Automatic TransFACTORY OEM SERVICE PROCEDURE

Variant Coding Procedure

  • On-Line Type On GDSΒ 
    1. With the ignition "OFF", connect GDS.
    2. Ignition "ON" & Engine "OFF" select vehicle name and airbag system.
    3. Select Variant coding mode.
    4. Follow steps on the screen as instructed.
      1. Initial ACU Variant Coding screen
        Fig 1: Display - ACU Variant Coding Screen
        G09743655Courtesy of KIA MOTORS AMERICA, INC.
      2. VIN Code entering screen
        Fig 2: Display - VIN Code Entering Screen
        G09743656Courtesy of KIA MOTORS AMERICA, INC.
      3. Variant coding's proceeding screen-1
        Fig 3: Display - Variant Coding's Proceeding Screen-1
        G09743657Courtesy of KIA MOTORS AMERICA, INC.
      4. Variant coding's proceeding screen-2
        Fig 4: Display - Variant Coding's Proceeding Screen-2
        G09743658Courtesy of KIA MOTORS AMERICA, INC.
      5. Variant coding is completed
        Fig 5: Display - Variant Coding's Completion Screen
        G09743659Courtesy of KIA MOTORS AMERICA, INC.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.