SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSKIA2015CADENZA PREMIUMREPAIR AND DIAGNOSISTRANSMISSIONTRANSMISSION CONTROL SYSTEMSAUTOMATIC TRANSAXLE CONTROL SYSTEMOUTPUT SPEED SENSORREPAIR PROCEDURESREMOVAL
2015 Kia Cadenza Premium

Repair procedures: Removal

2015 Kia Cadenza PremiumSECTION Removal
  1. Remove the battery and the battery tray.

    (Refer to BATTERY )

  2. Remove the under cover (A).

    Tightening torque: 

    7.8 ~ 11.7 N.m (0.8 ~ 1.2 kgf.m, 5.7 ~ 8.6 lb-ft)

    Fig 1: Identifying Under Cover
    G09751539Courtesy of KIA MOTORS AMERICA, INC.
  3. Replace new gasket and the plug after draining the automatic transaxle fluid by removing the drain plug.

    (Refer to "FLUID ")

  4. Remove the wiring bracket bolt (A).
    Fig 2: Identifying Wiring Bracket Bolt
    G09751540Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the valve body cover (B) and eyebolt (A).

    Tightening torque: 

    1. 2.9 ~ 4.9 N.m (0.3 ~ 0.5 kgf.m, 2.2 ~ 3.6 lb-ft)
    2. 13.7 ~ 15.7 N.m (1.4 ~ 1.6 kgf.m, 10.1 ~ 11.6 lb-ft)
      CAUTION: Always replace the gasket of the eyebolt use new one whenever loosening eyebolt.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.