2014 Kia Soul Base, Standard TransFACTORY OEM SERVICE PROCEDURE

DTC Information: DTC Detecting Condition

Item Detecting Condition Possible cause
DTC Strategy
  • Current Monitoring
  1. Faulty Installation of Front RH Wheel Speed Sensor
  2. Defective Front RH Rotor and Wheel Bearing
  3. Defective Front RH Wheel Speed Sensor
Threshold Value Case 1 (Large Air-Gap)
  • Wheel speed difference caused by air-gap or Defective tone wheel is detected while driving
Case 2 (Initial Monitoring)
  • 2.75 km/h (Approx. 1.7 mph) signal of Front RH Wheel Speed Sensor is detected at vehicle speed reaches 12 km/h (Approx. 7.4 mph)
Warning Indicator Lamp Status
  • In case of failure on one wheel
    • ABS/ESC (ESP) Warning Indicator Lamp "ON"
  • In case of failure on more than two wheels
    • EBD/ABS/ESC (ESP) Warning Indicator Lamp "ON"
Clear Condition
  • Ignition "OFF" and then "ON" and Vehicle speed over 12 km/h (Approx. 7 mph)
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.