Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2012 Kia Forte LX, Automatic TransFACTORY OEM SERVICE PROCEDURE
Rated Load
RATED LOAD SPECIFICATIONS CHART
| System Name | Capacity | Availability in Power |
|---|---|---|
| Horn relay | DC 12V 200mA (Inductive load) | B+ |
| Hazard relay | DC 12V 200mA (Inductive load) | B+ |
| Key hole illumination lamp | DC 12V 1.4W (LAMP) | B+ |
| Defogger relay | DC 12V 200mA (Inductive load) | B+ |
| Deicer relay | DC 12V 200mA (Inductive load) | B+ |
| Central unlock relay | DC 12V 200mA (Inductive load) | B+ |
| Central lock relay | DC 12V 200mA (Inductive load) | B+ |
| Drive door unlock relay | DC 12V 200mA (Inductive load) | B+ |
| Power window enable relay | DC 12V 200mA (Inductive load) | B+ |
| Front fog relay | DC 12V 200mA (Inductive load) | B+ |
| Rear fog relay | DC 12V 200mA (Inductive load) | B+ |
| Tail lamp relay | DC 12V 200mA (Inductive load) | B+ |
| Head lamp relay | DC 12V 200mA (Inductive load) | IG2 |
| Front wiper relay | DC 12V 200mA (Inductive load) | IG2 |
| Drive seat belt indicator lamp | DC 12V 1.2W (LED) | IG1 |
| Trunk unlock relay | DC 12V 200mA (Inductive load) | B+ |
| Key solenoid | DC 12V 1A (Inductive load) | B+ |
| Atm solenoid | DC 12V 200mA (Inductive load) | B+ |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
