Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2012 Kia Forte LX, Automatic TransFACTORY OEM SERVICE PROCEDURE
Warning Control
- Warning Control Data Flow
- Seat Belt Reminder
- From State Ign1 Off (Default State)STATE DESCRIPTION CHART
State Description Initial condition IGN1 OFFÂ Event Driver side seat belt is belted and IGN1 ON Action - Start Bulb check 6 seconds driver indicator blinking
- The automaton state is changed to IGN1 ON DRIVER BELTEDÂ
STATE DESCRIPTION CHARTState Description Initial condition IGN1 OFFÂ Event Driver side seat belt is unbelted and IGN1 ON Action - Start Bulb check 6 seconds driver indicator blinking
- Start Bulb check 6 seconds buzzer warning
- If ALT'L=ON then start ALT 6s indicator blinking & ALT 6s buzzer
- The automaton state is changed to IGN1 ON DRIVER UNBELTED
- From State Ign1 On Driver BeltedSTATE DESCRIPTION CHART
State Description Initial condition IGN1 ON DRIVER BELTEDÂ Event IGN1 OFFÂ Action - Stop Bulb check 6 seconds driver indicator blinking
- Stop ALT 6 seconds driver indicator blinking
- The automaton state is changed to IGN1 OFF
STATE DESCRIPTION CHARTState Description Initial condition IGN1 ON DRIVER BELTEDÂ Event Driver side seat belt is unbelted Action - Start Normal 6 seconds driver indicator blinking
- Start Normal 6 seconds buzzer warning
- The automaton state is changed to IGN1 ON DRIVER UNBELTED
STATE DESCRIPTION CHARTState Description Initial condition IGN1 ON DRIVER BELTED Event ALT 0 → 1 Action - Start ALT 6 seconds driver indicator blinking
- From State IGN1 On Driver UnbeltedSTATE DESCRIPTION CHART
State Description Initial condition IGN1 ON DRIVER BELTEDÂ Event IGN1 OFF Action - Stop Bulb check 6 seconds driver indicator blinking
- Stop Normal 6 seconds driver indicator blinking
- Stop ALT 6 seconds driver indicator blinking
- Stop ALT 6 seconds buzzer warning
- The automaton state is changed to IGN1 OFFÂ
STATE DESCRIPTION CHARTState Description Initial condition IGN1 ON DRIVER UNBELTEDÂ Event Driver side seat belt is belted Action - Stop Normal 6 seconds driver indicator blinking
- Stop ALL 6 seconds buzzer warning
- The automaton state is changed to IGN1 ON DRIVER BELTEDÂ
STATE DESCRIPTION CHARTState Description Initial condition IGN1 ON DRIVER UNBELTED Event Vehicle Speed ≥ 10km/h Action - Start buzzer and driver indicator Pattern (10 times (6 sec ON/24 sec OFF) +6 sec ON)
- The automaton state is changed to PATTERNÂ
STATE DESCRIPTION CHARTState Description Initial condition IGN1 ON DRIVER UNBELTED Event ALT'L 0→1 Action - Start ALT 6 seconds driver indicator blinking & ALT 6 seconds buzzer warning
- From State PatternSTATE DESCRIPTION CHART
State Description Initial condition PATTERNÂ Event IGN1 OFF Action - Stop Buzzer and driver indicator Pattern
- Stop ALL 6s driver indicator blinking
- Stop ALL 6s buzzer warning
- The automaton state is changed to IGN1 OFFÂ
STATE DESCRIPTION CHARTState Description Initial condition PATTERNÂ Event Driver side seat belt is belted Action - Stop Buzzer and driver indicator Pattern
- Stop Normal 6s driver indicator blinking
- Stop ALL 6s buzzer warning
- The automaton state is changed to IGN1 ON DRIVER BELTEDÂ
STATE DESCRIPTION CHARTState Description Initial condition PATTERN Event Vehicle Speed ≤ 5 km/h Action - Stop Buzzer and driver indicator Pattern
- If 6s buzzer period, after 6s warning stop Pattern
- The automaton state is changed to IGN1 ON DRIVER UNBELTEDÂ
- From State Ign1 Off (Default State)
- Key Operated Warning
- When Driver Door switch is ON at the status of KEY IN ON, Buzzer will be outputted per 0.6 sec continuously.
- If KEY IN turns OFF or Driver Door switch is CLOSED during Buzzer output, the output will turn OFF.
- When IGN1 turns ON while outputting, the output will be stopped.
T1 : 0.6 ± 0.1 sec
NOTE: KEY IN ON : Key In ON (SMK : FOB IN ON)
KEY IN OFF : Key In OFF (SMK : FOB IN OFF) - ESCL Not Locked Warning (SMK option)
- When receiving ESCL Not locked Warning (CAN) ON, when releasing while putting a alarm into effect, it'll be canceled immediately.
T1 : 0.6 ± 0.1 sec
- When receiving ESCL Not locked Warning (CAN) ON, when releasing while putting a alarm into effect, it'll be canceled immediately.
- ESCL Not Unlocked Warning (SMK option)
- When receiving ESCL Not unlocked Warning (CAN) ON, chime buzzer ON for 1 sec.
T1 : 1.0 ± 0.1 sec
- When receiving ESCL Not unlocked Warning (CAN) ON, chime buzzer ON for 1 sec.
- SSB Switch Warning (SMK option)
- When receiving SSB Warning (CAN) ON, outputting a alarm, and when receiving OFF, a stop will do a alarm immediately.
T1 : 0.6 ± 0.1 sec
- When receiving SSB Warning (CAN) ON, outputting a alarm, and when receiving OFF, a stop will do a alarm immediately.
- ID OUT Warning (SMK Option)
- When receiving ID OUT Warning ON, Outputting a alarm, and when receiving OFF, a stop will do a alarm immediately.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
