2012 Kia Forte LX, Automatic TransFACTORY OEM SERVICE PROCEDURE

Trunk Release Control

  1. Trunk Release Control Data Flow
    Fig 1: Trunk Release Control Data Flow Diagram
    G07369226Courtesy of KIA MOTORS AMERICA, INC.
  2. Trunk Release Relay Control
    1. Turn Trunk Release Relay ON during T1 when TX TRUNK or SMK (RKE TRUNK, TRUNK REOPEN) is ON.
    2. If ALL DOOR UNLOCK and TRUNK LID is OFF β†’ ON, Trunk Release Relay is ON during T1. (SMK option)
      Fig 2: Trunk Release Relay Control Timing Pattern
      G07369227Courtesy of KIA MOTORS AMERICA, INC.

      T1 : 0.5 Β± 0.1 sec

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.