Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2012 Kia Forte LX, Automatic TransFACTORY OEM SERVICE PROCEDURE
Engine Control/Fuel System - General Information: Specifications: Actuators
Injector
- Specification
ACTUATORS SPECIFICATIONS
| Item | Specification |
|---|---|
| Coil Resistance (Ω) | 13.8 ~ 15.2 (20°C (68°F)) |
ETC Motor (integrated into ETC Module)
- Specification
ETC MOTOR SPECIFICATIONS
| Item | Specification |
|---|---|
| Coil Resistance (Ω) | 1.2 ~ 1.8 (20°C (68°F)) |
Purge Control Solenoid Valve (PCSV)
- Specification
PURGE CONTROL SOLENOID VALVE (PCSV) SPECIFICATIONS
| Item | Specification |
|---|---|
| Coil Resistance (Ω) | 19.0 ~ 22.0 (20°C (68°F)) |
CVVT Oil Control Valve (OCV)
- Specification
CVVT OIL CONTROL VALVE (OCV) SPECIFICATIONS
| Item | Specification |
|---|---|
| Coil Resistance (Ω) | 6.9 ~ 7.9 (20°C (68°F)) |
Variable Intake Solenoid (VIS) Valve
- Specification
VARIABLE INTAKE SOLENOID (VIS) VALVE SPECIFICATIONS
| Item | Specification |
|---|---|
| Coil Resistance (Ω) | 30.0 ~ 35.0 (20°C (68°F)) |
Variable Charge Motion Actuator (VCMA)
- Specification
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.