2011 Kia Sorento Base, AutomaticFACTORY OEM SERVICE PROCEDURE

Variant coding Procedure

  • On-Line type on GDSΒ 
    1. Ignition "OFF", connect GDS.
    2. Ignition "ON" & Engine "OFF" select vehicle name and airbag system.
    3. Select Variant coding mode.
    4. Follow steps on the screen as below.
      1. Initial SRSCM Variant Coding screen
        Fig 1: Screen Display - ACU Variant Coding
        G07416027Courtesy of KIA MOTORS AMERICA, INC.
      2. VIN Code entering screen
        Fig 2: Screen Display - VIN Code Entering Screen
        G07416028Courtesy of KIA MOTORS AMERICA, INC.
      3. Variant coding's proceeding screen-1
        Fig 3: Screen Display - Variant Coding Proceeding Screen-1
        G07416029Courtesy of KIA MOTORS AMERICA, INC.
      4. Variant coding's proceeding screen-2
        Fig 4: Screen Display - Variant Coding Proceeding Screen-2
        G07416030Courtesy of KIA MOTORS AMERICA, INC.
      5. Variant coding is completed
        Fig 5: Screen Display - Variant Coding Is Completed
        G07416031Courtesy of KIA MOTORS AMERICA, INC.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.