Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2011 Kia Sedona EXFACTORY OEM SERVICE PROCEDURE
TCM Terminal Function
Connector (CLG-A)
TERMINALS REFERENCE
| Pin | Description |
|---|---|
| 1 | - |
| 2 | - |
| 3 | - |
| 4 | - |
| 5 | - |
| 6 | - |
| 7 | - |
| 8 | - |
| 9 | - |
| 10 | CAN communication line (High) |
| 11 | - |
| 12 | - |
| 13 | - |
| 14 | - |
| 15 | - |
| 16 | - |
| 17 | - |
| 18 | - |
| 19 | - |
| 20 | - |
| 21 | - |
| 22 | - |
| 23 | - |
| 24 | - |
| 25 | - |
| 26 | - |
| 27 | Ignition switch |
| 28 | - |
| 29 | Sports mode up switch |
| 30 | - |
| 31 | - |
| 32 | - |
| 33 | - |
| 34 | - |
| 35 | CAN communication line (Low) |
| 36 | - |
| 37 | - |
| 38 | - |
| 39 | - |
| 40 | - |
| 41 | - |
| 42 | - |
| 43 | - |
| 44 | Inhibitor switch signal 'S1' |
| 45 | Inhibitor switch signal 'S2' |
| 46 | Inhibitor switch signal 'S3' |
| 47 | Inhibitor switch signal 'S4' |
| 48 | - |
| 49 | - |
| 50 | - |
| 51 | - |
| 52 | - |
| 53 | - |
| 54 | Sports mode down switch |
| 55 | - |
| 56 | - |
| 57 | - |
| 58 | - |
| 59 | - |
| 60 | - |
| 61 | - |
| 62 | - |
| 63 | - |
| 64 | - |
| 65 | - |
| 66 | - |
| 67 | - |
| 68 | - |
| 69 | - |
| 70 | - |
| 71 | - |
| 72 | - |
| 73 | - |
| 74 | - |
| 75 | - |
| 76 | - |
| 77 | - |
| 78 | |
| 79 | Sports mode Select switch |
| 80 | - |
| 81 | - |
| 82 | - |
| 83 | - |
| 84 | Shift lock solenoid |
| 85 | Reverse lamp relay |
| 86 | P/N relay |
| 87 | - |
| 88 | - |
Connector (CLG-B)
TERMINALS REFERENCE
| Pin | Description |
|---|---|
| 1 | Overdrive clutch control solenoid valve (OD/C_VFS) |
| 3 | Input speed sensor signal |
| 4 | Output speed sensor signal |
| 26 | Torque converter control solenoid valve (T/con_VFS) |
| 27 | 35R clutch control solenoid valve (35R/C_VFS) |
| 28 | ON/OFF solenoid valve A (SS-A) |
| 29 | Input speed sensor power |
| 51 | Line pressure control solenoid valve (LINE_VFS) |
| 52 | Underdrive brake control solenoid valve (UD/B_VFS) |
| 53 | ON/OFF solenoid valve B (SS-B) |
| 54 | Output speed sensor power |
| 55 | Oil temperature sensor (-) |
| 57 | Oil temperature sensor (+) |
| 76 | Solenoid power 1 |
| 77 | Solenoid power 2 |
| 78 | 26 brake control solenoid valve (26/B_VFS) |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.