Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2010 Kia Rondo L4-2.4LFACTORY OEM SERVICE PROCEDURE
Emissions - California Emissions Data Extraction Info.: Overview
NUMBER 089 [Rev 2 05/25/2011]
GROUP Engine
DATE: December 2010
MODEL 2010 Models
SUBJECT:
DATA COLLECTION: EXTRACT CALIFORNIA EMISSIONS DATA FROM ECU (DC001)
*NOTICE
This bulletin provides information related to extracting "In use performance tracking" emissions data from the engine control unit (ECU) in certain vehicles sold in California. The California Air Resource Board (CARB) requires this emissions data to be extracted from the ECUs of a number of customer owned 2010 model year vehicles with a minimum of 3000 accumulated miles without reprogramming or resetting. To facilitate collection of this data at the dealer level, changes to the GDS have been made so that screen shots will allow the capture of relevant parameters data collection does not apply to vehicles or dealers operating outside of California parameters.
*NOTICE
This collection data does not apply to vehicles or dealers operating outside of California.
*NOTICE
IF THE VEHICLE MEETS THE CRITERIA BELOW, CALIFORNIA DEALERS MUST PERFORM THIS DATA COLLECTION ON VEHICLES WHENEVER AN AFFECTED VEHICLE IS IN THE SHOP FOR ANY MAINTENANCE OR REPAIR.
For vehicles listed on DCS as requiring this procedure, follow the instructions in this bulletin after confirming that the following criteria are met:
^ WebDCS shows this as an open Data Collection code DC001A-J (depending on model) for the vehicle.
^ Vehicle has more than 3000 miles on its odometer.
^ Vehicle repair history does not show battery replacement/disconnection/reset or an ECU Update done in the last 3000 miles, because IUMPR data would have been cleared by such an event.
^ Vehicle does not have a check engine light on.
CAUTION
If vehicle meets above criteria, collect data prior to any other campaign or repair related activities.
AFFECTED PRODUCTION RANGE
DATA COLLECTION WARRANTY CLAIM INFORMATION
8NOTICE
VIN inquiry data for this repair is provided for tracking purposes only. Kia retailers should reference DC001 when accessing the WebDCS system.
GROUP Engine
DATE: December 2010
MODEL 2010 Models
SUBJECT:
DATA COLLECTION: EXTRACT CALIFORNIA EMISSIONS DATA FROM ECU (DC001)
*NOTICE
This bulletin provides information related to extracting "In use performance tracking" emissions data from the engine control unit (ECU) in certain vehicles sold in California. The California Air Resource Board (CARB) requires this emissions data to be extracted from the ECUs of a number of customer owned 2010 model year vehicles with a minimum of 3000 accumulated miles without reprogramming or resetting. To facilitate collection of this data at the dealer level, changes to the GDS have been made so that screen shots will allow the capture of relevant parameters data collection does not apply to vehicles or dealers operating outside of California parameters.
*NOTICE
This collection data does not apply to vehicles or dealers operating outside of California.
*NOTICE
IF THE VEHICLE MEETS THE CRITERIA BELOW, CALIFORNIA DEALERS MUST PERFORM THIS DATA COLLECTION ON VEHICLES WHENEVER AN AFFECTED VEHICLE IS IN THE SHOP FOR ANY MAINTENANCE OR REPAIR.
For vehicles listed on DCS as requiring this procedure, follow the instructions in this bulletin after confirming that the following criteria are met:
^ WebDCS shows this as an open Data Collection code DC001A-J (depending on model) for the vehicle.
^ Vehicle has more than 3000 miles on its odometer.
^ Vehicle repair history does not show battery replacement/disconnection/reset or an ECU Update done in the last 3000 miles, because IUMPR data would have been cleared by such an event.
^ Vehicle does not have a check engine light on.
CAUTION
If vehicle meets above criteria, collect data prior to any other campaign or repair related activities.
AFFECTED PRODUCTION RANGE
DATA COLLECTION WARRANTY CLAIM INFORMATION
8NOTICE
VIN inquiry data for this repair is provided for tracking purposes only. Kia retailers should reference DC001 when accessing the WebDCS system.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.