Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSKIA2010FORTE EX, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMEDOOR LOCKSSMART KEY SYSTEMSMART KEY UNITREPAIR PROCEDURESREMOVALRF RECEIVER

2010 Kia Forte EX, Standard

RF Receiver

2010 Kia Forte EX, StandardSECTION RF Receiver

Disconnect the negative (-) battery terminal.
Remove the glove box (A).
(For Coupe, refer to CRASH PAD . For Sedan, refer to CRASH PAD .)

Fig 1: Identifying Glove Box
Courtesy of KIA MOTORS AMERICA, INC.
Remove the glove box housing (A) after loosening the mounting screws.

Fig 2: Identifying Glove Box Housing & Mounting Screws
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the connector (A) after loosening the RF receiver (C) nuts (B).

Fig 3: Identifying Connector, RF Receiver, & Nuts
Courtesy of KIA MOTORS AMERICA, INC.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.