2009 Kia Spectra LX, 2.0 1FACTORY OEM SERVICE PROCEDURE

Spark Test

  1. Disconnect the spark plug cable from the spark plug.
    Fig 1: Identifying Spark Plug Cables
    G00718825Courtesy of KIA MOTORS AMERICA, INC.
  2. Using a spark plug socket, remove spark plug.
  3. Install the spark plug to the spark plug cable.
  4. Ground the spark plug to the engine.
    Fig 2: Grounding Spark Plug
    G00718826Courtesy of KIA MOTORS AMERICA, INC.
  5. Check that spark occurs while engine is being cranked. Crank the engine for no more than 5 - 10 seconds.
    NOTE: To prevent fuel being injected from injectors while the engine is being cranked, remove the fuel pump relay (A) from the fuse box.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.