Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2009 Kia Spectra EX, 2.0 1, StandardFACTORY OEM SERVICE PROCEDURE
Output Actuators
IDLE SPEED CONTROL ACTUATOR (ISCA)
- Type: Double coil type
- Control Frequency: 100Hz
- Specification
ITEM SPECIFICATION
| Temperature °C (°F) | ISCA Resistance (Ω) | |
|---|---|---|
| Coil #1 (OPEN) | Coil #2 (CLOSE) | |
| -20 (-4) | 12.1 ~ 13.7 | 9.2 ~ 10.8 |
| 0 (32) | 13.4 ~ 15.0 | 10.2 ~ 11.8 |
| 20 (68) | 14.5 ~ 16.1 | 11.1 ~ 12.7 |
| 40 (104) | 15.7 ~ 17.3 | 12.0 ~ 13.6 |
| 60 (140) | 16.9 ~ 18.5 | 12.9 ~ 14.5 |
| 80 (176) | 18.0 ~ 19.6 | 13.8 ~ 15.4 |
CVVT OIL CONTROL VALVE (OCV)
- Specification
COIL RESISTANCE SPECIFICATION
| Temperature °C (°F) | OCV Resistance (Ω) |
|---|---|
| 0 (32) | 6.2 ~ 7.4 |
| 20 (68) | 6.8 ~ 8.0 |
| 40 (104) | 7.4 ~ 8.6 |
| 60 (140) | 8.0 ~ 9.2 |
| 80 (176) | 8.6 ~ 9.8 |
INJECTOR
- Type: Electromagnetic type
- Number: 4
- Specification
INJECTOR SPECIFICATION
| Temperature °C (°F) | Injector Resistance (Ω) | |
|---|---|---|
| SULEV | FED | |
| -20 (-4) | 11.1 ~ 12.2 | 12.2 ~ 12.3 |
| 0 (32) | 12.1 ~ 13.4 | 13.3 ~ 13.5 |
| 20 (68) | 13.1 ~ 14.5 | 14.4 ~ 14.6 |
| 40 (104) | 14.1 ~ 15.6 | 15.5 ~ 15.7 |
| 60 (140) | 15.2 ~ 16.8 | 16.6 ~ 16.8 |
| 80 (176) | 16.2 ~ 17.9 | 17.7 ~ 17.9 |
PURGE CONTROL SOLENOID VALVE (PCSV)
- Type: Duty Control type
- Specification
PCSV SPECIFICATION
| Temperature °C (°F) | PCSV Resistance (Ω) |
|---|---|
| -20 (-4) | 20 ~ 24 |
| 0 (32) | 22 ~ 26 |
| 20 (68) | 24 ~ 28 |
| 40 (104) | 25 ~ 29 |
| 60 (140) | 27 ~ 31 |
| 80 (176) | 29 ~ 33 |
CANISTER CLOSE VALVE (CCV)
- Type: ON/OFF Control type
- Specification (Resistance): 23 ~ 26 ? at 20°C (68°F) Ignition Coil
- Specification
CCV SPECIFICATION
| Temperature °C (°F) | Ignition Resistance (Ω) | |
|---|---|---|
| Primary Coil (Ω) | Secondary Coil (kΩ) | |
| -20 (-4) | 0.5 | 7.7 |
| 0 (32) | 0.54 | 8.4 |
| 20 (68) | 0.58 | 9.1 |
| 40 (104) | 0.62 | 9.8 |
| 60 (140) | 0.66 | 10.5 |
| 80 (176) | 0.71 | 11.2 |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.