Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2009 Kia Sedona BaseFACTORY OEM SERVICE PROCEDURE
Abs DTCS
ABS DIAGNOSTIC TROUBLE CODES DTC (LIST)
| DTC | DESCRIPTION |
|---|---|
| C1101 | Battery Voltage High |
| C1102 | Battery Voltage Low |
| C1200 | FL Wheel Speed Sensor- Open/Short |
| C1201 | FL Wheel Sensor- Range/Performance |
| C1202 | FL Wheel Speed Sensor-No Signal |
| C1203 | FR Wheel Speed Sensor- Open/Short |
| C1204 | FR Wheel Sensor- Range/Performance |
| C1205 | FR Wheel Speed Sensor-No Signal |
| C1206 | RL Wheel Speed Sensor- Open/Short |
| C1207 | RL Wheel Sensor- Range/Performance |
| C1208 | RL Wheel Speed Sensor-No Signal |
| C1209 | RR Wheel Speed Sensor- Open/Short |
| C1210 | RR Wheel Sensor- Range/Performance |
| C1211 | RR Wheel Speed Sensor-No Signal |
| C1213 | Wheel Speed Frequency Error |
| C1235 | Pressure Sensor-Electrical |
| C1237 | Pressure Sensor-Signal Fault |
| C1260 | Steering Angle Sensor-Signal |
| C1261 | Steering Angle Sensor Not Calibrated |
| C1282 | Yaw Rate & Lateral G Sensor-Electrical |
| C1283 | Yaw Rate & Lateral G Sensor-Signal |
| C1503 | ESC Switch Error |
| C1513 | Brake Light Switch Malfunction |
| C1604 | ECU Hardware Error |
| C1605 | CAN Control Hardware Error |
| C1611 | CAN Time Out-PCM (ECM) |
| C1612 | CAN Time Out-PCM (TCM) |
| C1616 | CAN BUS Off |
| C1623 | CAN Timeout Steering Angle Sensor |
| C1625 | CAN Time Out-ESC |
| C1626 | Implausible Control |
| C1702 | Variant Coding |
| C2112 | Valve Relay Malfunction |
| C2308 | FL Inlet Valve Malfunction |
| C2312 | FL Outlet Valve Malfunction |
| C2316 | FR Inlet Valve Malfunction |
| C2320 | FR Outlet Valve Malfunction |
| C2324 | RL Inlet Valve Malfunction |
| C2328 | RL Outlet Valve Malfunction |
| C2332 | RR Inlet Valve Malfunction |
| C2336 | RR Outlet Valve Malfunction |
| C2366 | TC Valve Primary(USV1) Error |
| C2370 | TC Valve Secondary (USV2) Error |
| C2372 | ESC Valve 1(HSV1) Error |
| C2374 | ESC Valve 2 (HSV2) Error |
| C2402 | Motor-Electrical |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.