Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2009 Kia Rondo L4-2.4LFACTORY OEM SERVICE PROCEDURE
Crankshaft
crankshaft Pulley
Tightening torque 166.6 - 176.4 N.m (17.0 - 18.0 kgf.m, 122.9 - 130.1 lb-ft)
Crankshaft
Standard end play 0.07 - 0.25 mm (0.0027 - 0.0098 in.)
Limit 0.30 mm (0.0118 in.)
Thrust bearing thickness 1.925 - 1.965 mm(0.0758 - 0.07736 in.)
Main journal diameter 51.942 - 51.960 mm (2.0449 - 2.0456 in.)
Crank pin diameter 47.954 - 47.972 mm (1.8879 - 1.8886 in.)
Tightening torque 19.6 N.m (2.0 kgf.m, 14.46 lb-ft) + 90°
Tightening torque 29.4 N.m (3.0 kgf.m, 21.7 lb-ft) + 120°
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.