2009 Kia Optima EX, 2.4 3FACTORY OEM SERVICE PROCEDURE

Function And Operation Principle

Variable Intake manifold Solenoid (VIS) valve is installed on the intake manifold. The VIS valve controls the vacuum modulator which activates a valve in the intake manifold. The PCM opens or closes this valve according to engine condition (Refer to ENGINE CONDITION CHARTΒ ).

Fig 1: Identifying Variable Intake Solenoid Valve Location
G06361963Courtesy of KIA MOTORS AMERICA, INC.
ENGINE CONDITION CHART

Engine Condition VIS Valve Operation
Medium speed Closed Increasing engine performance in low engine speed by reducing intake interference among cylinders
Low/High speed Open Minimizing intake resistance by shortening intake manifold length and increasing area of air entrance
Fig 2: Identifying Variable Intake Solenoid Valve Speed Direction
G06361964Courtesy of KIA MOTORS AMERICA, INC.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.