2009 Kia Optima EX, 2.4 3FACTORY OEM SERVICE PROCEDURE

Function And Operation Principle

The Continuously Variable Valve Timing (CVVT) system controls the amount of valve over-lap or under-lap by varying the amount of oil flow into an assembly mounted on the intake/exhaust camshaft. The PCM controls the oil control valve. As oil is directed into the chambers of the CVVT assembly, the cam phase is changed to suit various performance and emissions requirements.

  1. When camshaft rotates engine rotation-wise: Intake-Advance/Exhaust-Retard
  2. When camshaft rotates counter engine rotation-wise: Intake - Retard/Exhaust - Advance
Fig 1: Identifying CVVT Oil Control Valve Location
G06361952Courtesy of KIA MOTORS AMERICA, INC.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.