Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2008 Kia Sedona BaseFACTORY OEM SERVICE PROCEDURE
Engine Control System
ENGINE CONTROL TIGHTENING TORQUES
| Item | Kgf.m | N.m | lbs. ft |
|---|---|---|---|
| PCM installation bolts | 1.0-1.2 | 9.8-11.8 | 7.2-8.7 |
| Heated oxygen sensor (Bank 1/Sensor 1) installation | 5.0-6.0 | 49.1-58.9 | 36.2-43.4 |
| Heated oxygen sensor (Bank 1/Sensor 2) installation | 5.0-6.0 | 49.1-58.9 | 36.2-43.4 |
| Heated oxygen sensor (Bank 2/Sensor 1) installation | 5.0-6.0 | 49.1-58.9 | 36.2-43.4 |
| Heated oxygen sensor (Bank 2/Sensor 2) installation | 5.0-6.0 | 49.1-58.9 | 36.2-43.4 |
| Engine coolant temperature sensor installation | 2.0-4.0 | 19.6-39.2 | 14.5-28.9 |
| Manifold absolute pressure sensor installation bolt | 0.9-1.2 | 8.8-11.8 | 6.5-8.7 |
| Camshaft position sensor [Bank 1] installation bolt | 0.7-1.0 | 6.9-9.8 | 5.1-7.2 |
| Camshaft position sensor [Bank 2] installation bolt | 0.7-1.0 | 6.9-9.8 | 5.1-7.2 |
| Crankshaft position sensor installation | 0.8-1.2 | 7.8-11.8 | 5.8-8.7 |
| Knock sensor #1, 2 installation | 1.6-2.4 | 15.7-23.5 | 11.6-17.4 |
| ETC module installation bolt (on throttle body) | 0.7-1.1 | 6.9-10.8 | 5.1-8.0 |
| ETC module installation bolt (on ETC stay) | 1.6-2.6 | 15.7-25.5 | 11.6-18.8 |
| CVVT Oil temperature sensor installation | 2.0-4.0 | 19.6-39.2 | 14.5-28.9 |
| CVVT Oil control valve [Bank 1] installation bolt | 1.0-1.2 | 9.8-11.8 | 7.2-8.7 |
| CVVT Oil control valve [Bank 2] installation bolt | 1.0-1.2 | 9.8-11.8 | 7.2-8.7 |
| Vacuum valve (Variable intake actuator) installation bolts | 0.9-1.2 | 8.8-11.8 | 6.5-8.7 |
| Ignition coil condenser installation bolt | 0.7-1.1 | 6.9-10.8 | 5.1-8.0 |
| Ignition coil installation bolt | 0.4-0.6 | 3.9-5.9 | 2.9-4.3 |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.