2008 Kia Sedona BaseFACTORY OEM SERVICE PROCEDURE

Fuel System - General: Specification: Sensor

MASS AIR FLOW SENSOR (MAFS) 

  • Type: Hot-film type
  • Specification
MASS AIR FLOW SENSOR (MAFS) SPECIFICATION

Air Flow (kg/h) Frequency (Hz)
12.6 2,617
18.0 2,958
23.4 3,241
32.4 3,653
43.2 4,024
57.6 4,399
72.0 4,704
108.0 5,329
144.0 5,897
198.0 6,553
270.0 7,240
360.0 7,957
486.0 8,738
666.0 9,644
900.0 10.590

INTAKE AIR TEMPERATURE SENSOR (IATS) 

  • Type: Thermistor type
  • Specification
INTAKE AIR TEMPERATURE SENSOR (IATS) SPECIFICATION

Temperature Resistance (kΩ)
°C °F
-40 -40 100.87
-20 -4 28.58
0 32 9.40
10 50 5.66
20 68 3.51
40 104 1.47
60 140 0.67
80 176 0.33

MANIFOLD ABSOLUTE PRESSURE SENSOR (MAPS) 

  • Type: Piezo-resistive pressure type
  • Specification
MANIFOLD ABSOLUTE PRESSURE SENSOR (MAPS) SPECIFICATION

Pressure (kPa) Output Voltage (V)
20.0 0.79
46.66 1.84
101.32 4.00

ENGINE COOLANT TEMPERATURE SENSOR (ECTS) 

  • Type: Thermistor type
  • Specification
ENGINE COOLANT TEMPERATURE SENSOR (ECTS) SPECIFICATION

Temperature Resistance (kΩ)
°C °F
-40 -40 48.14
-20 -4 14.13-16.83
0 32 5.79
20 68 2.31-2.59
40 104 1.15
60 140 0.59
80 176 0.32

THROTTLE POSITION SENSOR (TPS) 

  • Type: Variable resistor type
  • Specification (When reference voltage = 5.0V)
THROTTLE POSITION SENSOR (TPS) VOLTAGE SPECIFICATION

Throttle Angle (°C) Output Voltage (V)
TPS1 TPS2
0 0V 5.0V
10 0.5V 4.5V
20 0.9V 4.1V
30 1.4V 3.6V
40 1.8V 3.2V
50 2.3V 2.7V
60 2.7V 2.3V
70 3.2V 1.8V
80 3.6V 1.4V
90 4.1V 0.9V
100 4.5V 0.5V
110 5.0V 0V
THROTTLE POSITION SENSOR (TPS) RESISTANCE SPECIFICATION

Item Sensor Resistance (kΩ)
TPS1 4.0-6.0 kΩ at 20°C (68°F)
TPS2 2.72-4.08 kΩ at 20°C (68°F)

ACCELERATOR POSITION SENSOR (APS) 

  • Type: Variable resistor type
  • Specification (When reference voltage = 5.0V)
ACCELERATOR POSITION SENSOR (APS) SPECIFICATION

Accelerator Position Output Voltage (V)
APS1 APS2
C.T. 0.7-0.8 0.29-0.46
W.O.T 3.85-4.35 1.93-2.18
ACCELERATOR POSITION SENSOR (APS) RESISTANCE SPECIFICATIONS

Item Sensor Resistance (kΩ)
APS1 0.7-1.3 kΩ at 20°C (68°F)
APS2 1.4-2.6 kΩ at 20°C (68°F)

HEATED OXYGEN SENSOR (HO2S) 

  • Type: Zirconia (ZrO2) type
  • Specification
HEATED OXYGEN SENSOR (HO2S) SPECIFICATION

A/F Ratio Output Voltage (V)
RICH 0.75-1.00V
LEAN 0-0.12V
HEATED OXYGEN SENSOR (HO2S) RESISTANCE SPECIFICATIONS

Item Resistance (Ω)
Sensor Heater 8.1-11.1 Ω at 21°C (69.8°F)

CAMSHAFT POSITION SENSOR (CMPS) 

  • Type: Hall effect type
  • Specification
CAMSHAFT POSITION SENSOR (CMPS) SPECIFICATION

Item Specification
Output Voltage (V) High: 5.0V
Low: 0.7V
Air Gap (mm) 0.5-1.5 mm

CRANKSHAFT POSITION SENSOR (CKPS) 

  • Type: Magnetic field sensitive type
  • Specification
CRANKSHAFT POSITION SENSOR (CKPS) SPECIFICATION

Item Specification
Coil Resistance (Ω) 630-770 Ω at 20°C (68°F)
Air Gap (mm) 0.5-1.5 mm

KNOCK SENSOR (KS) 

  • Type: Piezo-electricity type
  • Specification
KNOCK SENSOR (KS) SPECIFICATION

Item Specification
Capacitance (pF) 1,480-2,220pF

CVVT OIL TEMPERATURE SENSOR (OTS) 

  • Type: Thermistor type
  • Specification
CVVT OIL TEMPERATURE SENSOR (OTS) SPECIFICATION

Temperature Resistance (kΩ)
°C °F
-20 -4 16.52
20 68 2.45
80 176 0.29

FUEL TANK PRESSURE SENSOR (FTPS) 

  • Type: Piezo-Resistivity type
  • Specification
FUEL TANK PRESSURE SENSOR (FTPS) SPECIFICATION

Pressure (kPa) Output Voltage (V)
-3.75 kPa 0.5V
0 kPa 2.5V
+3.75 kPa 4.5V
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.