2008 Kia Magentis 2.7 4FACTORY OEM SERVICE PROCEDURE

Function Of Safety Power Window: Notes

When driver door power window auto-up switch is operated, safety function is activated.

  1. When a force of 100N is detected during window UP mode and the window is positioned between 4-250 mm from the top of the door, the window will automatically reverse travel to a distance of 300 mm from the top of the door.
    Fig 1: Identifying Driver Door Power Window Auto-Up
    G04806481Courtesy of KIA MOTORS AMERICA, INC.
    • When an obstruction is detected, and the window is positioned over 250 mm from the top of the door, the window will automatically reverse travel to a distance of 20 mm from the detection point.
      Fig 2: Identifying Driver Door Power Window Distance Of 20mm From Detection Point
      G04806482Courtesy of KIA MOTORS AMERICA, INC.
  2. When the auto-up switch is held in the UP position, and an obstruction is detected, the window will automatically reverse travel to a distance of 25mm from the detection point.
    Fig 3: Identifying Driver Door Power Window Distance Of 25mm From Detection Point
    G04806483Courtesy of KIA MOTORS AMERICA, INC.
  3. The safety power window function is not available if the window is within 4mm from the top of the door.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.