Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

2008 Kia AmantiFACTORY OEM SERVICE PROCEDURE

Starter Test Procedure: Notes

After the battery test, press ENTER immediately for the starter test.

Fig 1: Micro 570 Display - Press ENTER For Starting Test
Courtesy of KIA MOTORS AMERICA, INC.
After pressing ENTER key, start the engine.

Fig 2: Micro 570 Display - Start Engine
Courtesy of KIA MOTORS AMERICA, INC.
Cranking voltage and starter test results will be displayed on the screen.
Take a relevant action according to the test results by referring to the STARTER TEST RESULTS as given below.

Fig 3: Micro 570 Display - Cranking Voltage Normal
Courtesy of KIA MOTORS AMERICA, INC.
To continue charging system test, press ENTER.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready Tools Compare Repair Quote Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.