2008 Kia AmantiFACTORY OEM SERVICE PROCEDURE

General (Fuel System): Specification: Actuators

INJECTOR 

Number: 6

Specification

INJECTOR SPECIFICATIONS

Item Specification
Coil Resistance (Ω) 11.4 ~ 12.6Ω at 20°C (68°F)

PURGE CONTROL SOLENOID VALVE (PCSV) 

Type: Duty control type

Specification

PURGE CONTROL SOLENOID VALVE SPECIFICATIONS

Item Specification
Coil Resistance (Ω) 19.0 ~ 22.0Ω at 20°C (68°F)

VARIABLE INTAKE SOLENOID (VIS) VALVE 

Specification

VARIABLE INTAKE SOLENOID (VIS) VALVE SPECIFICATIONS

Item Specification
Coil Resistance (Ω) 30.0 ~ 35.0Ω [22°C (71.6°F)]

CVVT OIL CONTROL VALVE (OCV) 

Specification

CVVT OIL CONTROL VALVE (OCV) SPECIFICATIONS

Item Specification
Coil Resistance (Ω) 6.7 ~ 7.7Ω at 20°C (68°F)

ETC MOTOR 

Specification

ETC MOTOR SPECIFICATIONS

Item Specification
Coil Resistance (Ω) 1.275 ~ 1.725Ω at 20°C (68°F)

IGNITION COIL 

Type: Stick type

Specification

IGNITION COIL SPECIFICATIONS

Item Specification
1st Coil Resistance (Ω) 0.62Ω±10% at 20°C (68°F)
2nd Coil Resistance (kΩ) 7.0kΩ±15% at 20°C (68°F)

CANISTER CLOSE VALVE (CCV)

Type: ON/OFF control type

Specification

CANISTER CLOSE VALVE (CCV) SPECIFICATIONS

Item Specification
Coil Resistance (Ω) 23.0 ~ 26.0 at 20°C (68°F)
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.