Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2007 Kia Spectra L4-2.0LFACTORY OEM SERVICE PROCEDURE
Connecting Rod Specification
Connecting Rod
Remove the connecting rod from the piston.
Using a press, remove the piston pin from piston.
(Press-in load 350 - 1,350 kg(772 - 2,976 lb)
Check the connecting rod end play.
Using feeler gauge, measure the end play while moving the connecting rod back and forth.
End play
Standard 0.1 - 0.25 mm (0.0039 - 0.0098 in)
Maximum 0.4 mm (0.0157 in)
Allowable bend of connecting rod 0.05 mm / 100 mm (0.0020 in / 3.94 in ) or less
Allowable twist of connecting rod 0.1 mm / 100 mm (0.0039 in / 3.94 in) or less
Check the difference between the piston pin outer diameter and the connecting rod small end inner diameter.
Piston pin-to-connecting rod interference -0.032 ~ -0.016 mm (-0.0013 ~ -0.0006 in)
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.